In order to oil pressure cutting machine equipment service life is long, daily maintenance work is indispensable! Good maintenance work, can maintain the good performance of the cutting machine, but also can maintain the life of the parts.
1. Notes for daily maintenance of oil pressure cutting machine are as follows:
1, the oil pressure cutting machine table should be often wiped clean, can not be stained with lubricating oil, so as not to cut objects touched, affect the appearance of the finished product.
2, cut the board can not leave debris, or stained with lubricating oil, it is best to clean every day, to keep clean.
3, fill in the lubricating oil should pay attention to not touch other parts, if it must be wiped clean.
4. After the cutter is used, be sure to clean the surrounding area to keep the machine clean.
2. maintenance method:
1. When using the oil pressure cutting machine, pay attention to whether the lubricating oil in the oil can is still displayed. If not, there is no lubricating oil, please fill in the lubricating oil again.
2. When sending the lubricating oil into the four sliding shaft, just shake the handle back and forth.
3, hydraulic oil is recommended to use 68 # or 46 # hydraulic oil, hydraulic oil is generally replaced once a year.
4, the oil pressure cutting machine for a long time after the shutdown of the start lubrication four sliding shaft.
Scope of application of the cutting press machine
Suitable for foam materials, cardboard materials, textiles, plastic materials, leather, rubber, packaging materials, floor materials, carpet, glass fiber, cork and other non-metallic materials through the knife mold with the machine generated by the machine to achieve the cutting of materials.
The cutting equipment with high degree of automation includes: mobile head cutting machine controlled by computer, laser cutting machine (oscillation tool), high pressure water beam cutting machine and computer cutting machine, etc. In addition, Italian and British USM produce a projection cutting machine with oscillating tools and visual observation devices to scan the leather, or projection on the leather to guide the cutter to arrange the set of the cutting sample on the leather.
Post time: Aug-03-2025