1. When the cutting machine works, the cutter should be placed in the center of the upper pressure plate as far as possible to avoid unilateral wear on the machine and affect its life.
2. When replacing the new cutter, if the height is different, please reset it according to the setting method.
3. If the operation staff needs to temporarily leave the position, they must turn off the motor switch before leaving, so as not to damage the machine caused by improper operation.
4. Please avoid overload use to avoid damage to the machine and reduce the service life.
5. When setting the cutter, be sure to release the set wheel so that the setting rod can contact the cutting point control switch, otherwise the cutter setting switch is turned to ON.
6. When the cutting machine is cutting, please stay away from the cutting knife or cutting board. It is strictly prohibited to touch the cutting mold with your hand to avoid danger.
With the continuous development of China’s cutting work, the demand and requirements of cutting machine products are also gradually improving. Such progress brings greater motivation for job skills. In the future work, skill innovation is naturally the first priority, and skill progress is necessary, which is the most important condition for the high-speed development of work and market demand.
As we all know, China’s cutting work itself is late, and there are still some industrial questions. With the acceleration of transformation and promotion, all kinds of questions can not prevent the emergence. This is clearly a deterrent for the transition period.
In order to carry out the work to the intensive road, China must do its best to the operation policy of “low input and high output”, which requires the company to innovate from many aspects.
The development of cutting work needs internal repair and external refining, the first need is to change the concept, establish a long-term development concept and formulate a feasible development policy. And constantly improve the company’s management level, improve the management efficiency, reasonably optimize the department structure, prevent human capital and the waste, optimize the company’s internal competition mechanism, improve the essence of the work of workers, to the surface, to promote the work brand construction.
On the basis of cultivating the single company brand, through consistency and harmony, with the participation of multiple functional departments, we implement the regional famous brand training project, support the registration and application of the working group trademark. Use the brand agglomeration effect, the company agglomeration industry all development.
and, After contacting with relevant scientific research organizations and colleges and universities, Actively promote the company to strengthen the collaboration with relevant scientific research organizations and universities, Constitute a public skill service testing channel integrating production, learning, research and inspection; Build standardized information channels, Make the relevant skills organizations and standardization experts of each company to establish standardization information research groups; Encourage and support companies to participate in various fairs and fairs, Creating a conference brand, Establish the company’s promotion channels, Share the alliance promotion capital; Promote the construction of a talent strong area, Combined with the talent and skill advantages of each company, Using company and cut testing for intermediate capital, In the middle of cutting work skills development, Help the company to complete the transformation and promotion.
How to determine how the tonnage of the cutting machine is? What about the pressure?
The pressure calculation method of cutting machine is: the system pressure by the cylinder piston area; this formula everyone can calculate, the key is not know the specific value so can not calculate. But if you are careful, you can find that the hydraulic oil pump nameplate has a rated pressure standard, remember the value, and then measure the diameter of the cylinder; the system pressure times the cylinder piston area and then times the number of cylinders, so that we can roughly calculate the machine pressure.
The above is the calculation method, now how to see the specific pressure of the cutting machine:
1. Direct to the hydraulic pressure gauge to generate the value; if this value is close to the rating of the hydraulic pump, the machine pressure is normal. If the value is too different, then there is a leak in the hydraulic oil road or the hydraulic pump pressure attenuates. The current value and the percentage rating of the hydraulic pump can calculate the actual pressure of the cutter.
2, directly take the pressure detector on the workbench to pressure the reading, this is very simple, the instrument has converted the measured value into tons, but the instrument is more expensive, the general manufacturers will not buy one back to use.
3, by experience, listen to the sound, look at the movement to estimate, this must have a certain basic skills or long time contact with the machine to see.
\
Post time: Jul-13-2025