In some light industries, cutting and dividing items will inevitably use cutting machines. In modern times, with the continuous change of cutting machines, ultrasonic technology and other technologies have been used in leather punching technology. So what are the rules when operating cutting machines? Let me tell you about it.
To begin, adjust the cutting depth using the knob for fine-tuning. Once set, turn on the power and press the oil pump button to start the idle run, checking for system malfunctions. After completing the idle run, stack the push-pull plate, rubber plate, workpiece, and die in sequence at the workbench center. Remember to set the die parameters, then release the tool holder to allow the blade to drop naturally and lock automatically. Double-click the green button to initiate trial cutting, with the depth controlled through the fine-tuning knob.
Finally, the vibrating screen agent said that when changing the cutting machine tool mold, it is necessary to use the workpiece and the pad plate.
The so-called cutting machine is a kind of equipment used to cut the material. We often use this equipment in the production process of many enterprises, so as to provide a lot of convenience for production.
However, there are many things we need to pay attention to when using the cutting machine. Let me introduce them to you, so that you can not have any problems when using it.
First of all, before the formal use of the equipment, the handwheel must be set in a relaxed state, so as to ensure that the setting rod contacts the switch of the equipment. Then, the equipment can not be started manually, so as to ensure the normal operation of the equipment, so as to ensure the processing safety of people.
Secondly, when using the cutting machine, try to place the cutting tool in the middle of the pressure plate, so as to effectively ensure that there will be no uneven force leading to serious wear on one side, so that the life of the tool will be affected.
So there’s one thing we need to keep in mind when using the device.
Operating precautions for the cutting press machine
People who do not work in the factory often work very hard. In daily work, they need to use a lot of machines. No matter what kind of machines are used, they should pay attention to safety. Before using them, it is best to understand the key points of machine use, so as to ensure the safety of machine use to the greatest extent.
Even cutting machines require proper operation. What are the key operational considerations for these machines? When adjusting the cutting blade, first loosen the handwheel. Manufacturers of steel shot blasting machines recommend positioning the adjustment lever at the cutting point during calibration to ensure proper switch activation. If the blade setting switch is turned off, the adjustment mechanism will fail to operate.
When the cutting machine is working, the blade should be placed in the center of the upper pressure plate as far as possible to avoid the wear of the machine on one side, which will affect the service life of the cutting machine to some extent. When the cutting machine blade is replaced, safety should also be paid attention to.
Post time: Oct-26-2025